0–5 FTThe zone California's new rule is about

Get your home Zone Zero Certified.

We clear, rebuild and document the first five feet around your home to a 9-point ember-resistant standard. You get a certificate and photo report you can hand to your insurer, your FAIR Plan broker or a future buyer.

9 pointsChecked and photographed
1 crewAssess, build and document
CSLB #1037628Licensed CA contractor
Illustrated foothill home with its three wildfire zones drawn around it: Zone 0 from 0 to 5 feet, Zone 1 from 5 to 30 feet, Zone 2 from 30 to 100 feetZONE 0 · 0–5 FTZONE 1 · 5–30 FTZONE 2 · 30–100 FT
Zone 0 is the first five feet. That is what we certify.
The state rule

California's Zone 0 rule is on its way

On November 5, 2026, the state Board of Forestry and Fire Protection adopted its revised Zone 0 regulations, the "ember-resistant zone" rules for the first 5 feet around a home. They replace the draft the Board withdrew in August. The rules will cover homes in State Responsibility Areas and in locally designated Very High Fire Hazard Severity Zones, and they apply to existing homes as well as new ones.

Where it stands (November 2026): adopted by the Board and waiting on final review by the Office of Administrative Law. Every deadline below counts from the day the rule takes effect, and that date hasn't been set yet.

  • No bark, wood-chip mulch or other combustibles within 5 ft
  • The area under decks, stairs and balconies kept clear
  • Bare, noncombustible ground under eaves and 2 ft around windows, doors and vents
  • Limits on plants within 5 ft, and no new trees
  • The first 5 ft of any fence or gate that meets the house must be noncombustible
  • Sheds under 120 sq ft within 5 ft must be noncombustible
When it takes effect

New homes

  • Built to the Zone 0 rule from the start
Within 3 years

Existing homes: the ground

  • Mulch, debris and plants cleared from the first 5 ft
  • Under-deck areas and eaves cleared
3 to 5 years

Existing homes: structures

  • Fences, gates and small sheds brought into line
  • Local fire agencies can set the exact timing

CAL FIRE and local fire agencies will check Zone 0 during their regular defensible-space inspections. Every Zone Zero Certified home meets or exceeds the state's 0–5 ft rule, and our standard adds ember-resistant vents, gutter guards and a noncombustible wall base that the rule doesn't require.

This is a plain-language summary for general information, not legal advice. Check the official rule and your local fire agency to see what applies to your property.

The standard

The Zone Zero Certified standard

Built from California's Zone 0 rules, the Safer from Wildfires discount list and the IBHS Wildfire Prepared Home checklist. A home is certified when all nine points pass.

  1. 01

    Nothing that burns within 5 ft

    Bark, wood-chip mulch, dead plants, leaves and firewood removed. Gravel, pavers or hardscape in their place.

  2. 02

    Clear around openings

    No plants under eaves. 2 ft clear around windows, doors and vents.

  3. 03

    Under-deck protection

    Under decks, stairs and balconies cleared, and enclosed or screened where needed.

  4. 04

    Noncombustible fence connections

    5 ft of noncombustible fence or gate where it meets the house.

  5. 05

    Ember-resistant vents

    Attic, eave and foundation vents fitted with 1/8-inch metal mesh or ember-rated vents.

  6. 06

    Clean, guarded gutters

    Gutters cleared and fitted with noncombustible guards.

  7. 07

    6-inch noncombustible base

    Bottom 6 inches of exterior walls protected with noncombustible material.

  8. 08

    Trees kept clear

    No branches over the roof, 10 ft from chimneys, ladder fuels removed.

  9. 09

    Photo-documented

    Before and after photos of every item, delivered in your Zone Zero Certified report.

How it works

From walk-through to certificate

  1. 01

    Walk-through

    We check all nine points and give you a fixed-price scope for anything that doesn't pass.

  2. 02

    Zone 0 build

    Our crew clears the five feet, installs gravel or hardscape, vents, guards and fence connections.

  3. 03

    Certify

    We re-inspect, photograph every point and issue your Zone Zero Certified report and certificate.

  4. 04

    Keep it current

    An annual re-check keeps your certificate up to date, with cleanup before fire season.

Why it matters

Proof for your insurer, your broker and your buyer

Most items on the standard also appear on California's Safer from Wildfires discount list and the California FAIR Plan's wildfire discount list. A FAIR Plan dwelling policy that qualifies for all 12 FAIR Plan discounts can save up to 16.4% on the wildfire portion of the premium. Your report shows each upgrade with photos and dates, so your broker has what they need.

"Zone Zero Certified" is Ember Resistance Co.'s own completion standard. It is not a state, CAL FIRE, insurance or IBHS certification. Discounts and coverage decisions are up to each insurer and are not guaranteed.

ZONE ZERO CERTIFIED BY EMBER RESISTANCE CO. 0–5FEET
Certified homes get a dated certificate and a full photo report.

Ready to certify your first five feet?

Zone Zero Certified is the signature service of Ember Resistance Co., a licensed wildfire hardening contractor serving Placer, Nevada and Sacramento counties.

(530) 637-3324

Need more than Zone 0?

Ember Resistance Co. also handles full home hardening: siding, windows, Class A roofs and help applying for IBHS Wildfire Prepared Home.

Visit Ember Resistance Co. → Text us a photo of your home